HP Integrity NonStop H-Series - Manual (Page 99)

Configuring DSM/SCM
DSM/SCM User’s Guide — 529846-014
5 - 14
Setting Security for Operators
By default, each operator has full permission for ZPHITI access. To apply
restrictions, set the appropriate flags on the Operator Security screen.
b. When all permissions are set, press Shift-F2 if you are updating an existing
operator or F7 if you are adding an operator.

To check the security information for an operator, enter the operator’s user ID
or alias; then press F2. To check information about the next operator in the list,
press F3. If more than one page of operators exists, make any changes before
pressing F3 to check additional operators.

To delete the operator, enter the operator’s user ID or alias; then press F6.
DSM/SCM removes the operator from DSM/SCM.
4. After you have finished, press F16 twice to return to the main menu.