HP Integrity NonStop H-Series - Manual (Page 47)

DSM/SCM Interfaces and Tools
DSM/SCM User’s Guide — 529846-014
2 - 4
Using the DSM/SCM Interfaces
3. Stop the TMF process:
> TMFCOM STOP TMF
Using the DSM/SCM Interfaces
DSM/SCM includes these interfaces:

Planner Interface on page 2-4

Maintenance Interfaces on page 2-6

Target Interface on page 2-11
Planner Interface
The Planner Interface is a PC-based graphical user interface to DSM/SCM that
communicates with the host system. You can use it to receive software into the
DSM/SCM archive and to build and package new software configurations for target
systems. It contains Maintenance and Target Interface (ZPHITI) functions and can
usually be used instead of them. You can perform most DSM/SCM activities using the
Planner Interface, including:

Receive software into the archive

Create a software revision

Build and apply a configuration revision

Receive a target snapshot into the host database

Set up target systems, including creating profiles for each target

Produce detailed reports about defined configurations

Organize related software into groups for easier management

Maintain host system and volume

Maintain profile information for host and target systems

Monitor submitted requests that initiate DSM/SCM activities
Installing the Planner Interface
To install the Planner Interface, see Task 2: Install the Planner Interface on the PC on
page 4-7.
Entering the Planner Interface
To use the Planner Interface:
1. Check that DSM/SCM is running on your host system. See Starting DSM/SCM on
page 2-2.