HP Integrity NonStop H-Series - Manual (Page 208)

DSM/SCM User’s Guide — 529846-014
10 - 1
10
Activating New Software on a Target
System
Activating the new software involves preparing the system for the new software and
starting the new software. After an activation package is applied to a target system,
you must activate the software before it can be used.
Use the target interface (ZPHITI) to see the operator instructions for activating
software. The operator instructions included with the activation package vary
depending on the software being installed. Also, the planner might have edited the
instructions to include site-specific tasks earlier in the configuration process. Only the
instructions required for the particular installation are included in the activation
package.
This section provides an example of generated operator instructions. Make sure to use
the instructions that DSM/SCM generates for you because instructions vary for
different products and for any site-specific instructions the planner might add.
Topics discussed in this section include:

Summary of Activating the Software on page 10-2

Print the Instructions for Activating the Software on page 10-3

Example: Planner Instructions to Operator on page 10-3