HP Integrity NonStop H-Series User Manual

Page 411

ASSIGNs and PARAMs

E - 10

PARAM Summary

NO-DB-OWNER-SERVER

specifies to use the Super ID (255,255) to communicate across the EXPAND
network for the Build, Apply, Create snapshot, and Receive snapshot. Pass this
PARAM to the PATHWAY server CB-001 or TA-001. By default, all communication
between a host system and a target system uses the DSM/SCM user ID.

NO-DB-OWNER-SERVER-PROGID

specifies to use FUP directly from the active SYSnn subvolume, instead of using a
temporary copy of FUP that running as the DSM/SCM user ID(PROGIDed). Pass
this PARAM to CB-001 or TA-001.

If you specify this PARAM, some temporary files are not assigned a N purge
security. The PARAM allows the DSM/SCM user ID to clean up the temporary files
at the end of the activity. This includes all files that the activity needs to purge at
the end of the activity, such as manufactured files, sysgen input files, SRL input
files, public DLL input files, Activation Package, and tool files.

OVERRIDE-SYSNN "logical-target revision "

force an Apply to the current SYSnn subvolume. Pass this PARAM to the
PATHWAY server TA-001. Use this PARAM only if you can construct the same
software configuration (the new and target OSIMAGE EOFs are the same). See

OVERRIDE-SYSNN and OVERRIDE-SYSNN-DIFFERENT-OS Params

page E-13. There is no space between the name and number, and the PARAM is
not case-sensitive. For example:

"DEFAULT47"

logical_target

is the logical target name.

revision

is the new configuration revision number.

OVERRIDE-SYSNN-DIFFERENT-OS "logical-target revision "

See

OVERRIDE-SYSNN and OVERRIDE-SYSNN-DIFFERENT-OS Params

page E-13. There is no space between the name and number, and the PARAM is
not case-sensitive. For example:

"DEFAULT47"