HP Integrity NonStop H-Series - Manual (Page 160)

Creating and Managing Software Revisions
DSM/SCM User’s Guide — 529846-014
8 - 11
Checking Softdocs and Release Documents
a. Check the Print formatted output location check box if it is not already
checked.
b. To print the documents to a location other than the default, enter a different
spooler name in the output location field.
4. Checking the Revision History of a Software Configuration on page 8-13
Checking Softdocs for Products Changes
To check all the softdocs for products that changed between two configuration
revisions:
1. From the Configuration Revisions window, open an existing target by double-
clicking its name.
A window for the revision lists the existing software.
2. From the Software in Archive window, open the new software input by double-
clicking its name.
A window for the input opens listing the software in the input.
3. From the window of the software input, select Select changes.
DSM/SCM highlights differences between the software input and the existing
revision.
4. See Checking the Revision History of a Software Configuration on page 8-13.
Preparing Release Documents
Prepare release documents for either printing or online viewing:
1. In the Software in Archive window, select the input name of an RVU.
2. Select Requests>Prepare release documents.
DSM/SCM displays the Prepare Release Documents Request dialog box.