HP Integrity NonStop H-Series - Manual (Page 219)

Renaming Product Files Using ZPHIRNM
DSM/SCM User’s Guide — 529846-014
11 - 6
Error Handling
6. If the activating SYSnn is the running cold load SYSnn, the following note is
displayed after ZMODGP and ZPHIRNM run successfully:
Error Handling
ZPHIRNM issues an EMS message when it successfully completes. During rename
processing, ZPHIRNM issues error and warning messages as appropriate. When an
error occurs, ZPHIRNM displays the error and prompts you to select from several
available options. For a complete list of ZPHIRNM messages, including causes and
corrective actions, see the ZPHIRNM messages in the DSM/SCM Messages Manual.
You must correct the errors and run ZPHIRNM again. (ZPHIRNM skips any
subvolumes it has already processed.) You can resolve most errors in the PREVIEW
mode of ZPHIRNM. ZPHIRNM must run without errors to complete the software
activation.
Note. If the system is not cold loading, start the generic processes manually. If generic
processes that ZMODGP added are not started and those altered are stopped (aborted), then
check the ZMODGP output. The output must be checked on screen or in log file to identify
added or altered generic processes. Start the generic processes manually using the following
command:
SCF START PROCESS $ZZKRN.#< name>
Note. If you are using multiple logical targets on a system with alternate system disks, and are
performing ZPHIRNM on a SYSnn created after BUILD/APPLY on an alternate logical target
system, the ZPHIRNM will skip the execution of ZMODGP script. Otherwise, ZMODGP may
change the environment of the current target system.