HP Integrity NonStop H-Series User Manual
Page 232
Troubleshooting
DSM/SCM User’s Guide — 529846-014
13 - 7
Alternate System Volume Troubleshooting
SPI Definition, EMS
Template and Privileged
Declaration files are
missing after a
BUILD/APPLY is
performed.
In the DSM/SCM output options dialog box, you cleared or did
not select the options under Create Subvolume(s) for.
Create a new software revision with the options selected:
1.
Log on to the Planner Interface.
2.
Create a new software revision.
3.
Select Requests>BUILD & APPLY, or click Build/Apply
in the revision window.
4.
Select OUTPUT from the BUILD/APPLY dialog box.
5.
In the Output dialog box, select the desired files under
Create Subvolume(s) for.
6.
Click OK.
7.
Continue with the BUILD/APPLY as usual.
Export the files from the DSM/SCM archive:
1.
Log on to the Planner Interface.
2.
Select the desired SUT or SPR from the Software Archive.
3.
Select Requests>Request Export Files.
4.
In the Export Request dialog box, select all options
applicable in the Export developer files group box to
export the files for the selected products.
5.
From the Destination volume menu, select the desired
destination volume on which to place the subvolume/files.
6.
Click OK.
Problem
Recovery (page 2 of 2)