HP Integrity NonStop H-Series - Manual (Page 169)

Creating and Managing Software Revisions
DSM/SCM User’s Guide — 529846-014
8 - 20
Task 2: Copy Products to the New Software Revision
e. Select the desired heap manager (T8431 or T1269) that must be installed on to
the target system.

Click Continue to copy the SUT (with the selected heap manager) to the
new software revision.

Click Cancel to cancel the Copy to operation.
f. Select any other product, SPR, or product group to include in the new revision
from the archive, software input, or revision. To select individual products:

From the Configuration Revisions window or the Revision History window,
open a configuration revision.

From the Software in Archive window, open a software input.
g. Click Copy to for each item.
Figure 8-2. Heap Manager Selection Dialog Box
Note. The Heap Manager Selection feature is supported only on systems running
G06.29 and later G-series RVUs.
Note. Periodically some product numbers are consolidated into fewer product numbers.
Release documentation identifies these products when the consolidation occurs. Include only
the consolidated product numbers in your configuration revision, not the obsolete numbers.
VST002.vsd