HP Integrity NonStop H-Series - Manual (Page 190)

Building and Applying a New Configuration
DSM/SCM User’s Guide — 529846-014
9 - 13
Setting Target Subvolume Locations
3. Change the target subvolume (TSV) locations as necessary. See Changing the
Location of a TSV on page 9-13.
4. If you are not making any changes, click OK.
Changing the Location of a TSV
Note. Before making any changes, note that:

To avoid discrepancies, identify TSV locations correctly during the initialization Build/Apply.

Moving a SYSnn TSV from its original volume might require a system load that is
otherwise unnecessary.

If you manually copy or move a TSV on the target system or perform a volume operation
on the target (such as adding, deleting or renaming any volume), the changes are not
shown in the TSV Locations dialog box until after you perform a Verify Database and an
independent snapshot.

Changing the TSV location affects all future Build/Apply requests for a logical target.

Different logical targets cannot share the same TSV.

Each logical target must maintain its own set of TSVs on separate volumes.

Every TSV must have at least one location (volume). You cannot remove the last one.

To disregard TSV changes you enter, click Cancel in the TSV Locations dialog box.
VST105.vsd