HP Integrity NonStop H-Series - Manual (Page 302)

Managing DSM/SCM
DSM/SCM User’s Guide — 529846-014
17 - 9
Target Profile
Setting the Target System Generation Defaults
After you run INITENV with the initialize option, you must specify the output values.
Otherwise, you can review the defaults and change as necessary.
1. From the Target Information dialog box, click SYSGEN. DSM/SCM displays the
SYSGEN Defaults dialog box:
2. From the SYSGEN Defaults dialog box:
a. Enter values in the data fields as needed ( Table 17-4, System Generation
Information, on page 17-10).
b. From the SYSGEN Defaults dialog box, click OK to return to the Target
Information dialog box.
VST611.vsd