HP Integrity NonStop H-Series - Manual (Page 369)

DSM/SCM Differences
DSM/SCM User’s Guide — 529846-014
B - 2
Comparing DSM/SCM Product Versions
Comparing DSM/SCM Product Versions
If possible, always install the most recent DSM/SCM product version supported for the
type of NonStop system and RVU. For example, NonStop S-series systems support
the DSM/SCM G02 product version. The G02/H02 planner interface supports both
T6031G02 and T6031H01.
This subsection compares different DSM/SCM product versions.
Comparing T6031G02 to H01

The DSM/SCM T6031G02 can be installed on NonStop S-series systems only.

You can use a NonStop S-series host system to manage an Integrity NonStop
target system.
Comparing T6031H01 to D46
The DSM/SCM H01 product version supports Integrity NonStop systems only:

TNS/E, for Integrity NonStop systems, has been added to the Planner Interface
screens.

CNFGINFO now supports new system generation options for dynamic-link libraries
(DLLs).
These features are not supported:

Creating a system image tape (SIT) for an Integrity NonStop system is not
supported.

Creating a G-series RVU from an Integrity NonStop system for a NonStop S-series
target system is not supported.