Scratch register b (scratchb) – Avago Technologies LSI8751D User Manual
Page 195
5-79
Registers: 0x5C–0x5F (0xDC–0xDF)
Scratch Register B (SCRATCHB)
Read/Write
SCRATCHB
Scratch Register B
[31:0]
This is a general purpose user definable scratch pad
register. Apart from CPU access, only register
Read/Write and Memory Moves directed at the
SCRATCH register will alter its contents. The LSI53C875
cannot fetch SCRIPTS instructions from this location.
When bit 3 in the
register is set,
this register contains the base address for the 4 Kbytes
internal RAM. Setting
bit 3 only
causes the base address to appear in the
register; any information that was
previously in the register remains intact. Any writes to this
register while the bit is set pass through to the actual
register. The power-up
values are indeterminate.
Registers: 0x60–0x7F (0xE0–0xFF)
Scratch Registers C–J (SCRATCHC–SCRATCHJ)
Read/Write
These registers are general purpose scratch registers for user-defined
functions. The LSI53C875 cannot fetch SCRIPTS instructions from this
location. The power-up value of these registers is indeterminate.
31
0
SCRATCHB
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x