Data structure address (dsa), Interrupt status (istat), Interrupt status – Avago Technologies LSI8751D User Manual
Page 147: Istat)
5-31
Registers: 0x10–0x13 (0x90–0x93)
Data Structure Address (DSA)
Read/Write
DSA
Data Structure Address
[31:0]
This 32-bit register contains the base address used for all
table indirect calculations. The
register is usually loaded prior to starting an I/O,
but it is possible for a SCRIPTS Memory Move to load
the DSA during the I/O.
During any Memory-to-Memory Move operation, the
contents of this register are preserved. The power-up
value of this register is indeterminate.
Register: 0x14 (0x94)
Interrupt Status (ISTAT)
Read/Write
This register is accessible by the host CPU while the LSI53C875 is
executing SCRIPTS (without interfering in the operation of the function).
It is used to poll for interrupts if hardware interrupts are disabled. Read
this register after servicing an interrupt to check for stacked interrupts.
For more information on interrupt handling refer to
ABRT
Abort Operation
7
Setting this bit aborts the current operation under
execution by the LSI53C875. If this bit is set and an
interrupt is received, clear this bit before reading the
register to prevent further aborted
interrupts from being generated. The sequence to abort
any operation is:
1.
Set this bit.
31
0
DSA[31:0]
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
7
6
5
4
3
2
1
0
ABRT
SRST
SIGP
SEM
CON
INTF
SIP
DIP
0
0
0
0
0
0
0
0