Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 769)

L-force | PLC Designer
PLC Designer Visualization
DMS 3.2 EN 02/2011 TD29 767
INTERN CONNECT_TO | The PLC (target) will be switched; Preconditions:
The WebServer must be configured appropriately
with the connection parameters for the respective
target systems and a matching ini-file for the PLC-
Handler must be available.
PLC name: Name of the target PLC, as defined in
the PLC-Handler ini-file.
Start-Visu: Name of the desired start visualization
page.
The WebServer will establish the connection to the
respective PLC automatically.
Example: "INTERN CONNECT_TO PLC1|PLC_VISU"
Dialog for the trace recording in the operating version