Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 207)

L-force | PLC Designer
The Individual Components
DMS 3.2 EN 02/2011 TD29 205
Refresh Status
Command 'Project' 'Data Base Link' 'Refresh Status'
Use this command to update the display in the Object Organizer, so that you can see
the actual status of the objects concerning the source control of the project.
6.5 General Editing Functions...
You can use the following commands in all editors and some of them in the Object
Organizer. The commands are located under the menu item 'Edit' and in the context
menu that is opened with the right mouse button.
If the IntelliPoint-Software is installed on the computer, »PLC Designer« supports all
functions of the MS IntelliMouse. In all editors with zoom functionality: To magnify
press the key while rolling the wheel of the mouse, to reduce roll backwards
while the key is pressed.
6.5.1 'Edit' 'Undo'
Shortcut: +
This command undoes the action which was most recently executed in the currently-
open editor window or in the Object Organizer; repeated use undoes all actions back
to the time that the window was opened. This applies to all actions in the editors for
POUs, data types, visualizations and global variables and in the Object Organizer.
With 'Edit' 'Redo' you can restore an action which you have undone.
Note!
The commands Undo and Redo apply to the current window. Each window carries
its own action list. If you want to undo actions in several windows, then you must
activate the corresponding window. When undoing or redoing in the Object
Organizer the focus must lie here.