Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 594)

L-force | PLC Designer
Compiler Errors and Warnings
592 DMS 3.2 EN 02/2011 TD29
3558
"Priority of task '' is out of valid range between '' and 'limit>'"
The currently defined priority for the task is not valid for the currently set target
system. Change target or modify the task configuration correspondingly.
3559
"Task '': Interval-Tasks are not supported by the current target"
The current task configuration contains an interval task. This is not allowed by the
currently set target system. Change target or modify the task configuration
correspondingly.
3560
"Task '': free wheeling tasks are not supported by the current target"
The current task configuration contains an free wheeling task. This is not allowed by
the currently set target system. Change target or modify the task configuration
correspondingly.
3561
"Task '': event tasks are not supported by the current target"
The current task configuration contains event tasks which are not supported by the
currently set target system. Change target or modify the task configuration
correspondingly.
3562
"Task '': external event tasks are not supported by the current target"
The current task configuration contains external event tasks which are not supported
by the currently set target system. Change target or modify the task configuration
correspondingly.
3563
"The interval of task '' is out of valid range between '' and
''"
Change the interval value in the configuration dialog for the task.