Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 161)

L-force | PLC Designer
The Individual Components
DMS 3.2 EN 02/2011 TD29 159
Compare differences: If a line, a network or an element within a POU has been
modified, in compare mode it will be displayed in the bipartited window directly
opposite to the version of the other project (marked red, see below). If the option is
deactivated, the corresponding line will be displayed in the reference project as
'deleted' and in the actual project as 'inserted' (blue/green, see below). This means it
will not be displayed directly opposite to the same line in the other project.
Example:
Line 0005 has been modified in actual project (left side).
Example for "Oppose differences"
When the dialog 'Project Comparison' is closed by pressing OK, the comparison will be
executed according to the settings.