Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 749)

L-force | PLC Designer
PLC Designer Visualization
DMS 3.2 EN 02/2011 TD29 747
20.6.25 Alarm table
The element 'Alarm table' is used to visualize alarms, which must be defined before in
the PLC Designer Alarm configuration.
Note!
Depending on the target system there might be the possibility to do the alarm
handling in the PLC.
As soon as the element gets inserted in the visualization object, the dialog 'Configure
alarm table'. Besides the known categories for configuration of tooltip and security
the following settings concerning display and selection in the table can be made:
Category Alarm table:
Dialog for configuration of a alarm table, category Alarm table