Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 547)

L-force | PLC Designer
Command Line-/Command File
DMS 3.2 EN 02/2011 TD29 545
eni on
eni off The option 'Use source control (ENI)' will be activated resp.
deactivated
(Dialog 'Project' 'Options' 'Project source control')
eni project readonly on
eni project readonly off
The option 'Read only' for the data base category 'Project objects' will
be activated resp. deactivated
(Dialog 'Project' 'Options' 'Project objects')
eni shared readonly on
eni shared readonly off The option 'Read only' for the data base category 'Shard objects' will
be activated resp. deactivated
(Dialog 'Project' 'Options' 'Shared objects')
eni set local The object will be assigned to category 'Local', i.e. it will not be stored
in the project data base
(Dialog 'Project' 'Object' 'Properties' 'Data base-connection')
eni set shared The object will be assigned to category 'Shared objects'
(Dialog 'Project' 'Object' 'Properties' 'Data base-connection')
eni set project The object will be assigned to category 'Project objects'
(Dialog 'Project' 'Object' 'Properties' 'Data base-connection')
eni server
Configures the connection to the ENI Server for the category 'Project
objects'
(Dialog 'Project' 'Options' 'Project data base');
Example:
eni project server localhost 80 batchtest\project
EniBatch Batch
(TCP/IP-Address = localhost, Port = 80, Project name =
batchtest\project, User name = EniBatch, Password = Batch)
eni compile sym on
eni compile sym off The option 'Create ASCII symbol information (.sym)' for the objects of
category 'Compile files' will be activated/deactivated
(Dialog 'Project' 'Options' 'Project source control' 'ENI settings' for
'Compile files')
eni compile sdb on
eni compile sdb off The option 'Create binary symbol information (.sym)' for the objects
of category 'Compile files' will be activated/deactivated
(Dialog 'Project' 'Options' 'Project source control' 'ENI settings' for
'Compile files')
eni compile prg on
eni compile prg off
The option 'Create boot project' for the objects of category 'Compile
files' will be activated/deactivated
(Dialog 'Project' 'Options' 'Project source control' 'ENI settings' for
'Compile files')