Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 625)

L-force | PLC Designer
Compiler Errors and Warnings
DMS 3.2 EN 02/2011 TD29 623
4364
"A transition must be a boolean expression"
The result of the transition expression must be of type BOOL.
4365
"Time Constant expected after qualifier ''"
Open dialog ‚step attributes’ for the step '' and enter a valid time variable or
time constant.
4366
"The label of the parallel branch is no valid identifier: ''"
Enter a valid identifier next to the triangle which marks the jump label.
4367
"The label '' is already used"
There is already a jump label or a step with this name. Please rename correspondingly.
4368
"Action '' is used in multiple step chains, where one is containing the other!"
The action '' is used in the POU as well as in one or several actions of the POU.
4369
"Exactly one network requried for a transition"
There are used several FBD resp. LD networks for a transition. Please reduce to 1
network.
4370
"Additional lines found after correct IL-transition"
Remove the not needed lines at the end of the transition.
4371
"Invalid characters following valid expression: '"
Remove the not needed characters at the end of the transition.