Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 753)

L-force | PLC Designer
PLC Designer Visualization
DMS 3.2 EN 02/2011 TD29 751
Category Selection settings for alarm table:
Dialog for configuration of an alarm table, category 'Settings for alarmtable'
Define here some settings for the display for the chosen table fields:
Selection color: This button opens the standard dialog or a target-specific selection list
for choosing a color. Define the color in which selected fields should be displayed.
Row height: Height of the table rows in Pixel.
Slider size: Height of the slider (Pixel) at the bottom of the table.
Frame around selected rows: If this option is activated, selected table rows will get a
frame.
Show statusline: If this option is activated, below the alarm table a status bar will be
displayed providing the following buttons for the operation in online mode:
Acknowledge: All alarm entries marked in the alarm table get acknowledged.
Acknowledge all: All alarm entries listed in the alarm table get acknowledged.
History: If this button is pressed, instead of the current status of the alarms the table
will show a complete list of all events which have occurred up to now (all transitions
between any alarm stati). In this list no acknowledgement is possible ! Any new
events will be added currently.