Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 729)

L-force | PLC Designer
PLC Designer Visualization
DMS 3.2 EN 02/2011 TD29 727
Editing the column header and the column width:
Initially the edit field Column header will contain an automatically created title (e.g.
"PLC_PRG.arr1[INDEX].iNo" in case of an array of structure. for the column
representing the structure component "iNo"). which you can change Further on the
Column width (number of characters) can be set.
Editing configuration parameters for all elements of a column:
By default the table fields are displayed as simple rectangles and the entries are not
editable. If you however activate button Edit template for the currently marked
column, you can modify the parameters of the fields of this column, e.g. the line
width, text input etc. The template affects all fields of the current column and can be
edited via the known configuration dialog for a visualization element.
If you want to configure only one or several particular fields of the column, you can
use the following placeholders determining the desired row and column:
$ROWCONST$, $COLCONST$, INDEX. (INDEX has the same effect as $ROWCONST$).