Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 726)

L-force | PLC Designer
PLC Designer Visualization
724 DMS 3.2 EN 02/2011 TD29
• If you select the Draw option, the frame will be displayed in the color selected in
the Color and Alarm color buttons in the color dialog boxes (standard or target-
specific options). The alarm color will only be used if the variable in the Change
Color field in the Variable category is TRUE.
• In the selection list in the lower part of the dialog you can define whether the
bitmap should be inserted in the project (Embed) or whether just a link to an
external bitmap-file (path as entered above in the 'Bitmap' field) should be created
(Remember the link). It is reasonable to keep the bitmap file in the project
directory, because then you can enter a relative path. Otherwise you would enter
an absolute path and this might cause problems in case you want to transfer the
project to another working environment.
Visualization Element Configuration Dialog Box (Bitmap Category)