Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 459)

L-force | PLC Designer
The Resources
DMS 3.2 EN 02/2011 TD29 457
The following commands are firmly integrated in the run-time system and contained
in the ini-file with the corresponding entries for entry help, tooltips and help:
Command Description
? The run-time system supplies a list of the available commands. The list is
independent of the status of the description files of the target system.
mem Hexdump of a memory area
Syntax 1: mem
Addresses can be entered decimal, hexadecimal (Prefix 16#) or as a macro.
memc Hexdump relative to the start address of the code in the controller; like mem, the
data are added to the code area start address.
memd Hexdump relative to the data base address in the controller; like mem, the data
are added to the data area start address.
reflect Reflect current command line, for test purposes.
dpt Read and display data-pointer table.
ppt Read and display POU table.
pid Read and display project Id.
pinf Read and display project info (see 'Project' 'Project Info').
tsk Show list of IEC-tasks incl. task infos defined in the project.
startprg Start PLC program ('Online' 'Start').
stopprg Stop PLC program ('Online' 'Stop').
resetprg Reset PLC program. Only not-retentive data get initialized.
('Online' 'Reset).
resetprgcold Reset PLC program cold. Retentive data also get initialized.
('Online' 'Reset (cold)').
resetprgorg Reset PLC program original. The current application program as well as all data
(incl. retentive and persistent) are deleted.
('Online' 'Reset (origin)').
reload Reload boot project.
getprgprop Read and display program properties (Name, title, version author, date).
getprgstat Read and display program status (e.g. "run", "stop", last error, flags)
filedir File command "dir". List of files in the PLC directory.
filecopy Copy file [from] [to]. Example: "filecopy filename.txt filename2.txt".
filerename Rename files on PLC [old] [new]. Example: filerename oldname.txt newname.txt".
filedelete Delete file on PLC; Example: "filedelete file.xml".
saveretain Save retain variables. The name of the save file will be displayed afterwards.
restoreretain Load retain variables. The name of the save file, from which the variables values
are restored, will be displayed.