Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 588)

L-force | PLC Designer
Compiler Errors and Warnings
586 DMS 3.2 EN 02/2011 TD29
3413
"Error during import of the CAMs."
You have imported an export file (*.exp) which contains erroneous information on a
CAM. Check the export file.
3414
"Error during import of the CNC program list"
You have imported an export file (*.exp) which contains erroneous information on a
CNC program. Check the export file.
3415
Error during import of the Alarm configuration"
You have imported an export file (*.exp) which contains erroneous information on the
Alarm Configuration. Check the export file.
3450
"PDO'': Missing COB-Id!"
Click on the button ‚Properties’ in the PLC configuration dialog for the module and
enter a COB ID for the PDO .
3451
"Error during load: EDS-File '' could not be found, but is referenced in
hardware configuration!"
Eventually the device file needed for the CAN configuration is not in the correct
directory. Check the directory setting for configuration files in ‚Project' 'Options'
'Directories'.
3452
"The module '' couldn't be created!"
The device file for module does not fit to the current configuration.
Eventually it has been modified since the configuration has been set up in »PLC
Designer« or it is corrupted.