Allied Telesis AT-DC2552XS - Manual (Page 95)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section I: Switch Management 95
ERASE STARTUP-CONFIG
Syntax
erase startup-config
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to delete the boot configuration file to restore the
default settings to all the parameters on the switch. After entering this
command, enter the REBOOT command to reset the switch and restore
the default settings.
Example
This example erases the startup-config file and resets the switch with the
default settings:
awplus> enable
awplus# erase startup-config
erase start-up config? (y/n):y
Deleting..
Successful Operation
awplus# reboot