Allied Telesis AT-DC2552XS - Manual (Page 150)

Chapter 6: Boot Configuration File Commands
150 Section I: Switch Management
COPY STARTUP-CONFIG
Syntax
copy filename ..
cfg startup-config
Parameter
filename .. cfg
Specifies the name of a configuration file in the file system in the
switch. The file name is case-sensitive. The extension must be
“.cfg.”
Mode
Privileged Exec mode
Description
Use this command to save a configuration file in the file system in the
switch as the startup configuration file.
Confirmation Command
“DIR” on page 140
Example
This example saves a configuration file named “sw2_10_12.cfg” as the
startup configuration file:
awplus> enable
awplus# copy sw2_10_12.cfg startup-config