Allied Telesis AT-DC2552XS - Manual (Page 437)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section IV: IPv4 Multicast 437
SHOW IP IGMP SNOOPING
Syntax
show ip igmp snooping
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display the IGMP snooping configuration, multicast
router list, and host list. See Figure 71 for an example of the command
output.
Figure 71. SHOW IP IGMP SNOOPING Command
IGMP Snooping Configuration:
IGMP Snooping Status ............... Enabled
Host Topology ...................... Single-Host/Port
Host/Router Timeout Interval ....... 260 seconds
Maximum IGMP Multicast Groups ...... 64
Router Port(s) ..................... Auto Detect
Router List:
VLAN Port/ Exp.
ID Trunk ID RouterIP Time
----------------------------------------------------
1
port1.0.3 192.168.1.10 228
Host List:
Number of IGMP Multicast Groups: 1
VLAN Port/ IGMP Exp.
MultcastGroup ID TrunkID HostIP Ver Time
--------------------------------------------------------
224.0.1.1 1 port1.0.3 192.168.1.100 v2 230