Allied Telesis AT-DC2552XS - Manual (Page 28)

Chapter 1: AlliedWare Plus™ Command Line Interface
28 Section I: Switch Management
Moving Up the Hierarchy
Four commands are available for moving up the mode hierarchy. They are
the EXIT, QUIT, END and DISABLE commands.
EXIT and QUIT
Commands
These commands, which are functionally identical, are found in nearly all
of the modes. They move you up one level in the hierarchy, as illustrated
in Figure 6.
Figure 6. Moving Up One Mode with the EXIT and QUIT Command
END Command
You may want to return to the User Exec mode or the Privileged Exec
mode after you have configured a feature. While you can step back
through the modes one at a time with the EXIT or QUIT command, the
END command moves you directly to the Privileged Exec mode from any
mode below the Global Configuration mode.