Allied Telesis AT-DC2552XS - Manual (Page 179)

179
Chapter 8
SNMP Commands
The SNMPv1, SNMPv2c, and SNMPv3 commands are summarized in
Table 27.
Table 27. SNMPv1, SNMPv2c, SNMPv3 Commands
Command Mode Description
“NO SNMP-SERVER” on page 181 Global
Configuration Disables SNMPv1 and SNMPv2c on
the switch.
“NO SNMP-SERVER COMMUNITY”
on page 182 Global
Configuration Deletes SNMPv1 and SNMPv2c
community strings.
“NO SNMP-SERVER CONTACT” on
page 183 Global
Configuration Deletes the value of the MIB object
sysContact.
“NO SNMP-SERVER ENABLE TRAP”
on page 184 Global
Configuration Disables the transmission of
authentication traps, RMON traps, or
both.
“NO SNMP-SERVER ENGINEID
LOCAL” on page 185 Global
Configuration Removes the user-defined SNMPv3
engine ID.
“NO SNMP-SERVER GROUP” on
page 186 Global
Configuration Deletes an SNMPv3 group.
“NO SNMP-SERVER HOST” on
page 187 Global
Configuration Removes a trap or inform recipient.
“NO SNMP-SERVER LOCATION” on
page 189 Global
Configuration Removes the value of the MIB object
sysLocation.
“NO SNMP-SERVER USER” on
page 190 Global
Configuration Deletes an SNMPv3 user.
“NO SNMP-SERVER VIEW” on
page 191 Global
Configuration Deletes an SNMP view.
“NO SNMP TRAP LINK-STATUS” on
page 192 Port Interface Disables the transmission of SNMP
link status traps when ports establish
links or lose links to network devices.
“SHOW SNMP-SERVER” on
page 193 Privileged Exec Displays the current status of the
SNMP agent on the switch.