Allied Telesis AT-DC2552XS - Manual (Page 116)

Chapter 4: Basic Switch Operations Commands
116 Section I: Switch Management
SHOW RUNNING-CONFIG
Syntax
show running-config [snmp|log]
Parameters
snmp
Specifies the only SNMP section of the running-config file is
displayed.
log
Specifies the only LOG section of the running-config file is
displayed.
Modes
Privileged Exec mode
Description
Use this command to display the current settings of the switch. The
current settings of the switch are called the running-config and these are
stored in RAM. The command displays the settings that have been
changed from their default values and include the settings that have not
yet been saved in the startup-config file. Parameters that retain their
default settings are not included in the running-config file.
When entered with the SNMP or LOG keyword, the command displays the
only SNMP section or the only LOG section of the running-config file,
respectively. Without specifying a keyword, the command displays all of
the contents of the running-config file.
Example
This example displays the current settings of the switch:
awplus# show running-config