Allied Telesis AT-DC2552XS - Manual (Page 474)

Chapter 20: ACL Commands
474 Section V: Security and Traffic Control
SHOW ACCESS-LIST
Syntax
show access-list
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display the configuration of the hardware ACLs on
the switch. See Figure 72 for an example.
To display the port assignments of the ACLs, see “SHOW INTERFACE
ACCESS-GROUP” on page 475.
Figure 72. SHOW ACCESS-LIST Command
Examples
This example displays the configuration of the hardware ACL named
“acl_5”:
awplus# show access-list acl_5
This example displays all the hardware ACLs on the switch:
awplus# show access-list
Hardware IP access list acl_5
10 permit ip 192.168.10.1/28 any
20 permit ip 192.168.10.16/29 any
30 deny ip any any