Allied Telesis AT-DC2552XS - Manual (Page 241)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section II: Layer 2 Switching 241
CLEAR PORT COUNTER
Syntax
clear port counter port_ids
Parameter
port_ids
Specifies a port ID or multiple port IDs. Use a comma (,) to
separate port IDs and a hyphen (-) to indicate a range of port IDs.
Mode
User Exec mode
Description
Use this command to clear the packet counters on a port, or ports.
Confirmation Command
“SHOW PLATFORM PORT COUNTERS” on page 269
Example
This example clears the packet counters for ports 1.0.4 through 1.0.7:
awplus# clear port counter port1.0.4-port1.0.7