Allied Telesis AT-DC2552XS - Manual (Page 515)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section V: Security and Traffic Control 515
SHOW POLICY-MAP
Syntax
show policy-map policy_name
Parameter
policy_name
Specifies the name of a policy map. The policy map name is case-
sensitive and can be up to 63 alphanumeric characters.
Modes
Privileged Exec
Description
Use this command to display a list of the policy maps configured on the
switch. When you do not specify a class name, the command displays all
the class maps defined on the switch. See Figure 77 for an example of this
command.
Figure 77. SHOW POLICY-MAP Command
POLICY-MAP-NAME: pmap1
State: detached
Default class-map action: permit
CLASS-MAP-NAME: default
POLICY-MAP-NAME: pacl10
State: attached
Description: policy-based ACL 10
Default class-map action: permit
CLASS-MAP-NAME: default
CLASS-MAP-NAME: permitSA10
QOS-ACCESS-LIST-NAME: SA10
Match TCP Flags: ack syn
CLASS-MAP-NAME: denyS10
QOS-ACCESS-LIST-NAME: S10
Match TCP Flags: syn