Allied Telesis AT-DC2552XS - Manual (Page 65)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section I: Switch Management 65
SHOW USERS
Syntax
show users
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display the managers who are currently logged onto
the switch. See Figure 13 for an example of the output.
Figure 13. SHOW USERS Command
The columns are described in Table 5.
Table 5. SHOW USERS Command
Field Description
Line Indicates an active management session. The possible
designators are:
 con0: a local management session.
 vtyN: a remote Telnet and SSH session where N is a
number that is assigned to the session.
User Indicates the user name that is logged into the account.
Host(s) Not supported.
Idle Indicates the idling time.
Location Indicates the network device from which the manager is
accessing the switch. A device connected to the Console
port is identified by “ttyS0” while remote Telnet and SSH
devices are identified by their IP addresses.
Line User Host(s) Idle Location
con0 manager idle 00:00:00 ttyS0
vty0 manager idle 00:01:25 172.17.28.70
vty1 manager idle 00:04:06 172.17.28.71