Allied Telesis AT-DC2552XS - Manual (Page 196)

Chapter 8: SNMP Commands
196 Section I: Switch Management
SHOW SNMP-SERVER GROUP
Syntax
show snmp-server group
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display SNMPv3 groups and their settings on the
switch. Figure 37 shows an example.
Figure 37. SHOW SNMP-SERVER GROUP Command
The fields in the entries are described in Table 30.
Table 30. SHOW SNMP-SERVER GROUP Command
Parameter Description
Group Name Displays the group name.
Security Level Displays the security level of the group.
The options are:
 auth: authentication
 priv: authentication and encryption
 noauth: no authentication
SNMP group information:
Group Name .............admins
Security Level ......priv
Read View ...........most
Write View ..........most
Notify View .........most
Group Name .............operators
Security Level ......auth
Read View ...........standard
Write View ..........none
Notify View .........none