Allied Telesis AT-DC2552XS - Manual (Page 182)

Chapter 8: SNMP Commands
182 Section I: Switch Management
NO SNMP-SERVER COMMUNITY
Syntax
no snmp-server community community
Parameter
community
Specifies an SNMPv1 or SNMPv2c community string. This
parameter is case-sensitive.
Mode
Global Configuration mode
Description
Use this command to delete an SNMPv1 or SNMPv2c community string
from the switch.
Confirmation Command
“SHOW SNMP-SERVER COMMUNITY” on page 195
Example
This example deletes the “browsers” community string from the switch:
awplus> enable
awplus# configure terminal
awplus(config)# no snmp-server community browsers