Allied Telesis AT-DC2552XS - Manual (Page 307)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section II: Layer 2 Switching 307
INTERFACE VLAN
Syntax
interface vlan_ids
Parameter
vlan_ids
Specifies a VLAN ID or multiple VLAN IDs. Use a comma (,) to
separate VLAN IDs and a hyphen (-) to indicate a range of VLAN
IDs.
Mode
Global Configuration mode
Description
Use this command to move from the Global Configuration mode to the
Port Interface mode to configure VLANs.
Example
This example moves to the VLAN Interface mode to configure VLANs 10,
20, and 30:
awplus> enable
awplus# configure terminal
awplus(config)# interface Vlan10,20,30