Allied Telesis AT-DC2552XS - Manual (Page 37)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section I: Switch Management 37
CLEAR LINE
Syntax
clear line line_number
Parameter
line_number
Specifies the line number of a remote Telnet or SSH management
session. The line number ranges from 0 to 9.
Mode
Privileged Exec mode
Description
Use this command to log out of a specific remote Telnet or SSH
management session on another line. To view the line numbers, see the
Line Field in the SHOW USERS commands. The value of the line_number
parameter is the value of N in “vtyN.” See “SHOW USERS” on page 65.
Confirmation Command
“SHOW USERS” on page 65
Example
This example ends a remote management session on vty 0:
awplus> clear line 0