Allied Telesis AT-DC2552XS - Manual (Page 305)

305
Chapter 13
VLAN Commands
The VLAN commands are summarized in Table 54.
Table 54. Port-based and Tagged VLAN Commands
Command Mode Description
“INTERFACE VLAN” on page 307 Global
Configuration Enters the VLAN Interface mode from
the Global Configuration mode.
“NO SWITCHPORT ACCESS VLAN”
on page 308 Port Interface Assigns untagged ports to the default
VLAN 1.
“NO SWITCHPORT TRUNK” on
page 309 Port Interface Removes the tagged designation from
ports.
“NO SWITCHPORT TRUNK NATIVE
VLAN” on page 310 Port Interface Reestablishes the default VLAN 1 as
the native VLAN.
“NO VLAN” on page 311 VLAN
Configuration Deletes VLANs from the switch.
“NO VLAN MACADDRESS (Global
Configuration Mode)” on page 312 Global
Configuration Removes a MAC address from a MAC
address-based VLAN.
“NO VLAN MACADDRESS (Port
Interface Mode)” on page 313 Port Interface Removes a MAC address from egress
ports.
“SHOW VLAN” on page 314 User Exec Displays all the VLANs on the switch.
“SHOW VLAN MACADDRESS” on
page 316 Privileged
Exec Displays MAC address-based VLANs.
“SWITCHPORT ACCESS VLAN” on
page 318 Port Interface Assigns a VLAN to the untagged
ports.
“SWITCHPORT MODE ACCESS” on
page 319 Port Interface Enters the access mode to configure
untagged ports.
“SWITCHPORT MODE TRUNK” on
page 320 Port Interface Enters the trunk mode to configure
tagged ports.
“SWITCHPORT TRUNK ALLOWED
VLAN” on page 322 Port Interface Adds and removes tagged ports from
VLANs.
“SWITCHPORT TRUNK NATIVE
VLAN” on page 324 Port Interface Designates native VLANs for tagged
ports.
“VLAN” on page 326 VLAN
Configuration Creates port-based and MAC
address-based VLANs.