Show mac address-table – Allied Telesis AT-DC2552XS User Manual
Page 394
Chapter 15: MAC Address Table Commands
394
SHOW MAC ADDRESS-TABLE
Syntax
show mac address-table [interface
port_ids
]|[vlan
vid
]
Parameters
port_ids
Specifies the port ID or multiple port IDs. MAC addresses
associated with the specified to the port ID are listed. Use a
comma (,) to separate port IDs and a hyphen (-) to indicate the
range of port IDs.
vid
Specifies the VLAN ID. MAC addresses that belong to the VLAN
are listed. The range is 1 to 4,094.
Modes
Privileged Exec mode
Description
Use this command to display the ageing timer as well as the unicast and
multicast MAC addresses the switch has stored in the MAC address table.
You may view all of the addresses in the table or only the addresses
learned or specified on a particular port or VLAN. See Figure 63 for an
example of the table.
Figure 63. SHOW MAC ADDRESS-TABLE Command
Aging Interval: 300 second(s)
Switch Forwarding Database
Total Number of MAC Addresses: 4
----------------------------------------------------------------
VLAN
port
mac
fwd
----------------------------------------------------------------
2
1.0.7
00:00:00:00:00:01
Forward
dynamic
1
1.0.37
00:00:00:00:00:03
Forward
dynamic
1
po2
00:15:77:FF:00:10
Forward
dynamic
1
CPU
00:E0:0C:02:01:FD
Forward
static
Multicast Switch Forwarding Database
Total Number of MCAST FDB Addresses: 1
-----------------------------------------------------------------
VLAN
mac
Port Maps (U:Untagged T:Tagged)
-----------------------------------------------------------------
1
01:00:5E:00:01:01 Dynamic
U:port1.0.9
T: