Allied Telesis AT-DC2552XS - Manual (Page 459)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section V: Security and Traffic Control 459
NO ACCESS-LIST HARDWARE
Syntax
no access-list hardware listname
Parameter
listname
Specifies the name of a hardware ACL. The name is case-
sensitive.
Mode
Global Configuration mode
Confirmation Command
“SHOW ACCESS-LIST” on page 474
Description
Use this command to delete an ACL.
Note
When a hardware ACL is assigned to a class map or applied to a
port interface, you cannot delete the hardware ACL.
Example
This example deletes the hardware access list “acl_5”:
awplus> enable
awplus# configure terminal
awplus(config)# no access-list hardware acl_5