Allied Telesis AT-DC2552XS - Manual (Page 73)

73
Chapter 3
Basic Command Line Management
Commands
The basic command line commands are summarized in Table 6.
Table 6. Basic Command Line Commands
Command Mode Description
“CLEAR SCREEN” on page 75 User Exec and
Privileged Exec Clears the screen.
“CONFIGURE TERMINAL” on
page 76 Privileged Exec Moves you from the Privileged Exec
mode to the Global Configuration
mode.
“DISABLE” on page 77 Privileged Exec Returns you to the User Exec mode
from the Privileged Exec mode.
“DO” on page 78 Global
Configuration Performs Privileged Exec mode
commands from the Global
Configuration mode.
“ENABLE” on page 79 User Exec Moves you from the User Exec mode
to the Privileged Exec mode.
“ENABLE PASSWORD” on page 80 Global
Configuration Specifies the password which permits
management accounts with a privilege
level of 1 an option to move to the
Privilege Exec mode.
“END” on page 81 All modes below
the Global
Configuration
mode Returns you to the Privileged Exec
mode.
“EXIT” on page 82 All modes except
the User Exec
and Privileged
Exec Moves you up one mode.
“LOGOUT” on page 83 User Exec Ends a management session.
“NO ENABLE PASSWORD” on
page 84 Global
Configuration Removes the password which permits
management accounts with a privilege
level of 1 to move to the Privilege
Exec mode.