beautypg.com

No storm-control – Allied Telesis AT-DC2552XS User Manual

Page 255

background image

AT-DC2552SX Switch Command Line Interface User’s Guide

Section II: Layer 2 Switching

255

NO STORM-CONTROL

Syntax

no storm-control broadcast|multicast|dlf

Parameters

broadcast

Specifies broadcast packets.

multicast

Specifies multicast packets.

dlf

Specifies unknown unicast packets.

Description

Use this command to remove packet threshold levels that were set on the
ports with the STORM-CONTROL command. See “STORM-CONTROL”
on page 278.

Confirmation Command

“SHOW STORM-CONTROL” on page 275

Examples

This example removes the threshold limit for broadcast packets on port
1.0.12:

awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.12
awplus(config-if)# no storm-control broadcast

This example removes the threshold limit for unknown unicast rate on port
1.0.5:

awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.5
awplus(config-if)# no storm-control dlf