Allied Telesis AT-DC2552XS - Manual (Page 296)

Chapter 12: LACP Commands
296 Section II: Layer 2 Switching
SHOW PORT ETHERCHANNEL
Syntax
show port etherchannel port_ids
Parameter
port_ids
Specifies a port ID or multiple port IDs. Use a comma (,) to
separate port IDs and a hyphen (-) to indicate a range of port IDs.
Mode
Privileged Exec mode
Description
Use this command to display the LACP port information of the specified
ports. See Figure 55 for an example of the command output.
.
Figure 55. SHOW PORT ETHERCHANNEL Command
Link: Port: 1.0.26
Aggregator # 1
Receive machine state: Current
Periodic Transmission machine state: Slow periodic
Mux machine state: Distributing
ACTOR
PARTNER
==========================================================================
Actor Port ............ 05
Partner Port ........ 26
Selected .............. SELECTED Partner System ...... 00-15-77-FF-00-02
Oper Key .............. 0xff19 Oper Key ........... 0xff19
Oper Port Priority ... 0x001a Oper Port Priority .. 0x001a
Individual ............ NO Individual .......... NO
Synchronized........... YES Synchronized......... YES
Collecting ........... YES Collecting .......... YES
Distributing .......... YES Distributing ........ YES
Defaulted ............. NO Defaulted ........... NO
Expired ............... NO Expired ............. NO
Actor Churn ......... YES Partner Churn ....... YES