Allied Telesis AT-DC2552XS - Manual (Page 291)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section II: Layer 2 Switching 291
The fields are described in Table 49.
Table 49. SHOW ETHERCHANNEL SUMMARY Command
Field Description
Aggregator Indicates the ID number of the LACP trunk group.
Mac address Displays the MAC address of the switch and the
Admin Key.
Admin Key Indicates the value that is used to generate the
LACP port key.
Oper Key Indicates the LACP port key.
Receive link count Displays the number of the member ports that
have the link status of “wait” or “sync.”
Transmit link count Displays the number of the member ports that
have the link status of “sync.”
Individual Indicates the aggregation flag. The options are:
 0 - Aggregatable: The port can form an
aggregation with other ports.
 1 - Individual: The port does not have other
ports to form an aggregation.
Ready Indicates if the section logic is executable.
 0 - Not Executable: The section logic is not
executable.
 1 - Executable: The section logic is
executable.
Distribution Mode Displays the load balance settings of the LACP
trunk group. The options are:
 MACSrc: Source MAC address
 MACDest: Destination MAC address
 MACBoth: Source and Destination MAC
addresses
 IPSrc: Source IP address
 IPDest: Destination IP address
 IPBoth: Source and Destination IP addresses
Partner LAG Displays the MAC address and Admin Key of the
other (partner) LACP device.