Allied Telesis AT-DC2552XS - Manual (Page 435)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section IV: IPv4 Multicast 435
SHOW IP IGMP HOSTLIST
Syntax
show ip igmp hostlist
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display the IGMP host list. See Figure 69 for an
example of the command output.
Figure 69. SHOW IP IGMP HOSTLIST Command
The fields are described in the SHOW IP IGMP SNOOPING command
table. See the Host List section of Table 73 on page 438.
Example
This example displays the IGMP host list:
awplus# show ip igmp hostlist
Host List:
Number of IGMP Multicast Groups: 1
VLAN Port/ IGMP Exp.
MultcastGroup ID TrunkID HostIP Ver Time
--------------------------------------------------------
224.0.1.1 1 port1.0.3 192.168.1.100 v2 228