Allied Telesis AT-DC2552XS - Manual (Page 458)

Chapter 20: ACL Commands
458 Section V: Security and Traffic Control
NO ACCESS-GROUP
Syntax
no access-group acl_name
Parameter
acl_name
Specifies the name of a hardware ACL.
Mode
Port Interface mode
Description
Use this command to remove the assignment of a hardware ACL from the
switch port.
Confirmation Command
“SHOW INTERFACE ACCESS-GROUP” on page 475
Example
This example removes the assignment of the hardware ACL “acl_10” from
ports1.0.15 through 1.0.20:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.15-port1.0.20
awplus(config-if)# no access-group acl_10