Allied Telesis AT-DC2552XS - Manual (Page 443)

443
Chapter 20
ACL Commands
The Access Control List (ACL) commands are summarized in Table 74.
Table 74. Access Control List Commands
Command Mode Description
“ACCESS-GROUP” on page 445 Port Interface Assigns hardware access control lists
to ports.
“ACCESS-LIST HARDWARE” on
page 447 Global
Configuration Creates a new hardware access list or
modifies an existing hardware access
list.
“COPY-TO-MIRROR” on page 448 Hardware
Access List Adds a new copy-to-mirror statement
to the hardware access control list or
modifies an existing copy-to-mirror
statement.
“DENY” on page 453 Hardware
Access List Adds a new deny statement to the
hardware access control list or
modifies an existing deny statement.
“NO ACCESS-GROUP” on page 458 Port Interface Removes the assignment of a
hardware access control list to the
switch port.
“NO ACCESS-LIST HARDWARE” on
page 459 Global
Configuration Deletes hardware access lists from
the switch.
“NO COPY-TO-MIRROR” on
page 460 Hardware
Access List Deletes a copy-to-mirror statement
from the hardware access control list.
“NO DENY” on page 463 Hardware
Access List Deletes a deny statement from the
hardware access control list.
“NO PERMIT” on page 466 Hardware
Access List Deletes a permit statement from the
hardware access control list.
“PERMIT” on page 469 Hardware
Access List Adds a new permit statement to the
hardware access control list or
modifies an existing permit statement.
“SHOW ACCESS-LIST” on page 474 Privileged Exec Displays the ACLs on the switch.
“SHOW INTERFACE ACCESS-
GROUP” on page 475 Privileged Exec Displays the port assignments of the
hardware access control lists.