Storm-control – Allied Telesis AT-DC2552XS User Manual
Page 278
Chapter 11: Port Parameter Commands
278
STORM-CONTROL
Syntax
storm-control broadcast|multicast|dlf level
value
Parameters
broadcast
Specifies broadcast packets.
multicast
Specifies multicast packets.
dlf
Specifies unknown unicast packets.
value
Specifies the maximum number of ingress packets per second of
the specified packet type. Units are packets per second (pps),
Kpps, and Mpps. Specify one of the following formats:
–
1 to 33554368: Specify a number in this range. The unit is
pps. The maximum number for 10G ports is 14,880,900.
–
1k to 3276k: Specify a number in this range with “k” as the
suffix. The unit is Kpps. The suffix “k” is not case-sensitive.
The maximum number for 10G ports is 14,532K.
–
1m to 31m: Specify a number in this range with “m” as the
suffix. The unit is Mpps. The suffix “m” is not case-sensitive.
The maximum number for 10G ports is 14M.
Mode
Port Interface mode
Description
Use this command to set thresholds for the ingress packets on the ports.
Ingress packets that exceed the thresholds are discarded by the ports.
You can set thresholds independently for broadcast packets, multicast
packets, and unknown unicast packets.
Confirmation Command